Our Las Vegas crew lifts the tired finish, keeps the dust in the hose and hands the floor back the same evening, anywhere in Clark County.
A free look at the floor, a per square foot price in writing, and your evening back the same day.
Three moves, in this order, in one visit. The whole trick is that the abrasion is gentle and the extraction is immediate.
A slow orbital pad, dressed with fine screens, works only the worn finish layer. It never chews down to raw wood the way a drum sander must, which is exactly why the boards keep their thickness and the house keeps its calm.
A sealed shroud hugs the pad and a vacuum pulls every particle away the instant it exists. Nothing drifts to the bookshelves, nothing settles in the vents, and the wipe-down afterwards takes minutes, not a weekend.
Once the surface is keyed and spotless, a new coat of waterborne finish goes down and bonds to the old one. The shine you get is not polish sitting on top of tired wood, it is a real finish layer with years in it.
Sandless refinishing renews the finish, not the wood underneath it. That sentence decides everything, so we put it up front. When your floor needs the full sanding treatment, we say so at the free look and you keep your money for the right job.
Roughly four floors in five that we look at qualify. The fifth gets a straight answer and a handshake, because a crew that promises miracles over dead wood is the reason this trade has a reputation to repair.
Twenty minutes at your place. We read the finish, run a moisture meter over the suspect spots, rub an adhesion patch where the sun cannot see it, and measure the rooms. You get one per square foot price in writing before we leave the driveway.
The crew arrives in the morning and works the house in halves: furniture slides to one side, pad and vacuum make their passes, the coat goes down, then the halves trade places. Most homes are done between breakfast and late afternoon.
The finish needs a still house more than it needs anything from you. Socks are fine that evening, furniture glides back on felt the next day, and area rugs take a week off while the coat hardens all the way through.
Species, wear and how much furniture rides along move the figure inside those brackets. The number you sign is the number from the written quote, measured at the free look.
Here is the part people double-check on the phone. No, you do not empty the room, and no, you do not book a hotel. The crew slides each piece a few feet on cloth gliders, works the exposed half, and slides everything back once the first stretch can take the weight. The china stays in the cabinet the whole time, because nothing in the house vibrates hard enough to rattle it.
The finish we lay is waterborne. It smells faintly of nothing much for an afternoon, the way a freshly mopped kitchen does, and the smell is gone by the time you cook dinner. Windows cracked for an hour is plenty. Nobody sleeps at grandma's over it.
By evening the surface takes socks. By the next day it takes shoes, chairs and the dog. Felt pads go under the furniture feet as we set them back, the care sheet goes on the counter, and the only trace we leave is the part you wanted: a floor that looks like it remembers being new.
The honest version: the pad produces fine particles and the sealed vacuum swallows them at the source, so what reaches the room is close to nothing. You will not find powder on the windowsills or in the vents. We still run a wipe cloth over nearby surfaces before leaving, and it comes up nearly clean.
Neither. The crew shuffles furniture zone by zone and puts it all back on felt pads. You lose the use of the floor for the working day and walk it in socks that same evening. Beds stay made, cabinets stay full, life barely notices.
Socks the same evening, shoes and furniture the next day, area rugs after about a week around Las Vegas. The coat keeps hardening under your feet for several days, which is why the rugs go last.
Then you hear it from us at the free look, plainly. Gouges to bare wood, gray boards and deep cupping call for a full sanding, and a fresh coat over them would be a shine on borrowed time. About one floor in five we visit gets that answer, along with a fair description of what the bigger job involves.
Usually better than sanding does. Engineered boards carry a thin wear veneer that a drum sander eats through, while our pad only dresses the finish. Old solid floors that have been sanded many times before are the same story: no thickness lost, no risk of nailheads surfacing.
Three to five years in a busy household before the next refresh makes sense, longer in quiet rooms. The pleasant math is that a floor can be refreshed this way again and again, since no wood is removed, while each full sanding spends board thickness you never get back.
The map shows the lay of the land; the lists further down name every community a crew can reach from here with the pad still warm.
One quiet day between this floor and the way it used to look.
Price my floor refresh